WFDB Software Package 10.7.0

File: <base>/doc/wpg-src/Makefile.tpl (5,479 bytes)
# file: Makefile.tpl		G. Moody	  24 May 2000
#				Last revised:     25 October 2017
# Change the settings below as appropriate for your setup.

# D2PARGS is a list of options for dvips.  Uncomment one of these to set the
# paper size ("a4" is most common except in the US and Canada):
# D2PARGS = -t a4
D2PARGS = -t letter

# T2DARGS is a list of options for texi2dvi.  Uncomment one of these to set the
# page size (the size of the printed area on the paper):
# T2DARGS = -t @afourpaper
T2DARGS = -t @letterpaper

# PDFTEXCFG is the name of a file containing parameter settings for pdftex
# (used by texi2dvi).  Choose the file corresponding to your paper size:
# PDFTEXCFG = pdftex.cfg-a4
PDFTEXCFG = pdftex.cfg-letter

# LN is a command that makes the file named by its first argument accessible
# via the name given in its second argument.  If your system supports symbolic
# links, uncomment the next line.
LN = ln -sf
# Otherwise uncomment the next line if your system supports hard links.
# LN = ln
# If your system doesn't support links at all, copy files instead.
# LN = cp

# If you wish to install the info (GNU hypertext documentation) files from this
# package, specify the commands needed to format them from the texinfo source
# files, and to install them so that 'info' and related utilities can find
# them.  If you have GNU 'makeinfo' and 'install-info' (preferred),
# uncomment the next two lines.
MAKEINFO = makeinfo --force --no-warn
INSTALLINFO = install-info --info-dir=$(DESTDIR)$(INFODIR) $(DESTDIR)$(INFODIR)/wpg

# Otherwise, you can use GNU emacs to do the formatting, and standard utilities
# to install the info files, by uncommenting the next two lines.
# MAKEINFO = ./makeinfo.sh
# INSTALLINFO = $(MAKE) install-wpg.info

# PERL is the full pathname of your perl interpreter, needed for 'make htmlpg'.
PERL = /usr/bin/perl

# PSPRINT is the name of the program that prints PostScript files. If your
# printer is not a PostScript printer, see the GhostScript documentation to see
# how to do this (since the figure files are in PostScript form, it is not
# sufficient to use a non-PostScript dvi translator such as dvilj).
PSPRINT = lpr

# TROFF is the name of the program that prints UNIX troff files (needed to
# print the covers of the guide).  Use 'groff' if you have
# GNU groff (the preferred formatter).
TROFF = groff
# Use 'ptroff' if you have Adobe TranScript software.
# TROFF = ptroff
# Consult your system administrator if you have neither 'groff' nor 'ptroff'.
# Other (untested) possibilities are 'psroff', 'ditroff', 'nroff', and 'troff'.

# It should not be necessary to modify anything below this line.
# -----------------------------------------------------------------------------

all:	wpg.html wpg.pdf
	$(MAKE) INFODIR=../wpg/info INSTALLINFO=: wpg.info
	cp -p wpg.pdf ../wpg

install:
	@echo Nothing to install in wpg-src.

uninstall:
	rm -f ../wpg/*

# 'make wpg-book': print a copy of the WFDB Programmer's Guide
wpg-book:	wpg.ps
	cp wpg.cover wpgcover
	echo $(SHORTDATE) >>wpgcover
	echo .bp >>wpgcover
	$(TROFF) wpgcover >wpgcover.ps
	$(PSPRINT) wpgcover.ps
	$(PSPRINT) wpg.ps

# 'make wpg.hlp': format the WFDB Programmer's Guide as an MS-Windows help file
wpg.hlp:	wpg.tex
	makertf --hpj=wpg.hpj --output=wpg.rtf --force wpg.tex
	@echo Ignore any errors that appear above!
	hcrtf -o wpg.hlp -x wpg.hpj
	test -s WPG.HLP && mv WPG.HLP wpg.hlp
	rm -f wpg.rtf wpg.hpj wpg.ph

# 'make wpg.html': format the WFDB Programmer's Guide as HTML
wpg.html:	wpg.tex
	cp -p wpg.tex ../wpg
	cd ../wpg; texi2html -short_ext -menu -split_node wpg.tex
	cd ../wpg; if [ -d wpg ]; then mv wpg/* .; rmdir wpg; fi
	mv ../wpg/wpg.htm ../wpg/wpg_btoc.htm	# use top page as brief TOC
	rm -f ../wpg/wpg.tex
	./fixpg.sh ../wpg
	sed "s/LONGDATE/$(LONGDATE)/" <wpg.ht0 | \
	  sed "s/VERSION/$(VERSION)/" >../wpg/wpg.htm
	cd ../wpg; $(LN) wpg.htm index.html

# 'make wpg.info': format the WFDB Programmer's Guide as info files
wpg.info:	wpg.tex
	$(MAKEINFO) wpg.tex
	test -d $(DESTDIR)$(INFODIR) || \
	 ( mkdir -p $(DESTDIR)$(INFODIR); $(SETDPERMISSIONS) $(DESTDIR)$(INFODIR) )
	cp wpg wpg-* $(DESTDIR)$(INFODIR)
	$(SETPERMISSIONS) $(DESTDIR)$(INFODIR)/wpg*
	rm -f wpg wpg-*
	PATH=$$PATH:/usr/sbin; $(INSTALLINFO)

# 'make install-wpg.info': install info entry (if install-info is unavailable)
install-wpg.info:	wpg.info
	test -s $(DESTDIR)$(INFODIR)/dir || cp dir.top $(DESTDIR)$(INFODIR)/dir
	grep -s wpg $(DESTDIR)$(INFODIR)/dir >/dev/null || cat dir.wpg >>$(DESTDIR)$(INFODIR)/dir

# 'make wpg.info.tar.gz': create a tarball of info files
wpg.info.tar.gz:	wpg.tex
	$(MAKEINFO) wpg.tex
	mv wpg wpg-* info
	tar cfv - info | gzip >info.tar.gz

# 'make wpg.pdf': format the WFDB Programmer's Guide as PDF
wpg.pdf:	wpg.tex
	sed 's/@-//g' <wpg.tex >wpg1.tex
	mv wpg1.tex wpg.tex
	rm -f wpg.aux wpg.idx wpg.ind wpg.toc
	cp $(PDFTEXCFG) pdftex.cfg
	texi2dvi --pdf $(T2DARGS) wpg.tex
	rm pdftex.cfg wpg.tex

# 'make pg.ps': format the WFDB Programmer's Guide as PostScript
wpg.ps:		wpg.tex
	rm -f wpg.aux wpg.idx wpg.ind wpg.toc
	texi2dvi $(T2DARGS) wpg.tex
	dvips $(D2PARGS) -o wpg.ps wpg.dvi

wpg.tex:	wpg0.tex
	sed 's/VERSION/$(VERSION)/' <wpg0.tex | \
	 sed 's/LONGDATE/$(LONGDATE)/' >wpg.tex

# 'make clean': remove intermediate and backup files
clean:
	rm -f info.tar.gz wpg wpg-* wpg.aux wpg.cp wpg.cps wpg.dvi wpg.fn \
	 wpg.fns wpg.ilg wpg.ky wpg.log wpg.pdf wpg.ps wpg.pg wpg.tex wpg.toc \
	 wpg.tp wpg.vr wpgcover wpgcover.ps *~ ../wpg/info/dir