# file: freebsd.def		G. Moody	5 March 2002
#				Last revised:   25 January 2018
# 'make' definitions for compiling the WFDB Software Package under FreeBSD
#
# Based on 'linux.def', with edits for FreeBSD thanks to Giuseppe Pagnoni.
#
# Choose a value for WFDBROOT to determine where the WFDB Software Package will
# be installed.  One of the following is usually a reasonable choice.
# Installing in /usr generally requires root permissions, but will be easiest
# for future software development (no special -I or -L options will be needed
# to compile software with the WFDB library, since the *.h files and the
# library will be installed in the standard directories).
WFDBROOT = /usr
# Installing in /usr/local usually requires root permissions.  On a multi-user
# system where it is desirable to keep the OS vendor's software separate from
# other software, this is a good choice.  Another common choice in such cases
# is /opt .
# WFDBROOT = /usr/local
# To install without root permissions, a good choice is to set WFDBROOT to the
# name of your home directory, as in the example below (change as needed).
# WFDBROOT = /home/frodo

# LC and LL are used to determine C compiler and linker options needed to
# enable NETFILES (code that allows applications linked to the WFDB library to
# read input from HTTP and FTP servers, in addition to the standard filesystem
# support available without NETFILES).  The WFDB library can use either
# libcurl (recommended) or libwww to provide NETFILES support.  To use libcurl,
# set LC to `curl-config --cflags` (note the backquotes) and LL to
# `curl-config --libs`.  Otherwise, to use libwww, set LC to
# `libwww-config --cflags` and LL to `libwww-config --libs`.  If neither
# libcurl nor libwww is available, LC and LL should be empty (and NETFILES
# will be disabled).
LC =
LL =

# BINDIR specifies the directory in which the applications will be installed;
# it should be a directory in the PATH of those who will use the applications.
BINDIR = $(WFDBROOT)/bin

# DBDIR specifies the name of a directory in which to install the contents
# of the `data' directory.
DBDIR = $(WFDBROOT)/database

# INCDIR specifies the name of a directory in which to install the WFDB
# library's #include <...> files.
INCDIR = $(WFDBROOT)/include

# INFODIR is the GNU info directory (optional, needed to `make info').
INFODIR = $(WFDBROOT)/info

# LIBDIR specifies the name of a directory in which to install the WFDB
# library.
LIBDIR = $(WFDBROOT)/lib

# MANDIR is the root of the man page directory tree.  On most systems, this is
# something like /usr/man or /usr/local/man (type 'man man' to find out).
MANDIR = $(WFDBROOT)/man

# PSPDIR specifies the name of a directory in which to install the PostScript
# prolog (*.pro) files from the 'app' directory.
PSPDIR = $(WFDBROOT)/lib/ps

# CC is the name of your C compiler.
CC = gcc

# CCDEFS is the set of C compiler options needed to set preprocessor variables
# while compiling the WFDB Software Package.  CCDEFS should always include
# VDEFS.  Add the following options to CCDEFS as appropriate (separating them
# by spaces if you use more than one):
#   -DISPRINTF	  if you do not have `stdlib.h' and your `sprintf' returns an
#		   int (see wfdblib.h)
#   -DNETFILES	  if you have libwww and want to be able to access WFDB files
#		   remotely via http or ftp (as well as local files)
#   -DNOSTRTOK	  if your standard C library does not include function `strtok'
#		   (see wfdbio.c)
#   -DNOTIME	  if you do not have `time.h' (see signal.c)
#   -DNOVALUES_H  if you do not have `values.h' (see psd/log10.c)
#   -DOLDC	  if you have neither `stdarg.h' nor `varargs.h' (see wfdbio.c)
# If your C compiler fails to compile `signal.c', add -DBROKEN_CC to CCDEFS
# and try again (see signal.c).
CCDEFS = $(VDEFS) -DNOVALUES_H

# MFLAGS is the set of architecture-dependent (-m*) compiler options, which
# is usually empty.  See the gcc manual for information about gcc's -m options.
MFLAGS =

# CFLAGS is the set of C compiler options.  CFLAGS should always include
# CCDEFS.
CFLAGS = $(MFLAGS) -g -O $(CCDEFS) $(LC) -I$(DESTDIR)$(INCDIR)

# RPATHFLAGS is a set of C compiler options that cause the program to
# search for shared libraries in a non-standard location at run-time.
# These options are not needed or useful when using a static library.
RPATHFLAGS = -Wl,-rpath,$(LIBDIR)

# LDFLAGS is appended to the C compiler command line to specify loading the
# WFDB library.
LDFLAGS = -L$(DESTDIR)$(LIBDIR) -lwfdb $(LL)

# WFDBLIB is the name of the standard WFDB library.  In order to access it via
# `-lwfdb', WFDBLIB should be `libwfdb.a'.
WFDBLIB = libwfdb.a

# BUILDLIB is the command that creates the static WFDB library once its
# components have been compiled separately;  the list of *.o files that
# make up the library will be appended to BUILDLIB.
BUILDLIB = $(AR) $(ARFLAGS) $(WFDBLIB)

# RANLIB is the command that builds an index of symbols in the static
# library, after it has been created by the BUILDLIB command.
RANLIB = ranlib

# PRINT is the name of the program used to produce listings (including any
# options for the desired formatting).
PRINT = lpr

# SETPERMISSIONS is the command needed to make the installed files accessible
# to those who will use them.  The value given below makes them readable by
# everyone, and writeable by the owner only.  (If you perform the installation
# as `root', `root' is the owner of the installed files.)
SETPERMISSIONS = chmod 644

# SETDPERMISSIONS is similarly used to make directories created during the
# installation accessible.
SETDPERMISSIONS = chmod 755

# SETLPERMISSIONS is the command needed to make the WFDB library usable by
# programs linked to it.
SETLPERMISSIONS = chmod 644

# SETXPERMISSIONS is the command needed to make the applications accessible.
SETXPERMISSIONS = chmod 755

# STRIP is the command used to compact the compiled binaries by removing their
# symbol tables.
STRIP = strip
# To retain the symbol tables for debugging, comment out the previous line, and
# uncomment the next line.
# STRIP = :

# ...........................................................................
# This section of definitions is used only when compiling WAVE, which is
# possible only if the XView and Xlib libraries and include files have been
# installed.

# OPENWINHOME specifies the root directory of the OpenWindows hierarchy.
# This is usually /usr/openwin.
OPENWINHOME = /usr/openwin

# OWINCDIR is the directory in which the `xview' directory containing XView
# *.h files is found.
OWINCDIR = $(OPENWINHOME)/include

# OWLIBDIR is the directory in which the XView library is found.
OWLIBDIR = $(OPENWINHOME)/lib

# XHOME specifies the root directory of the X11 hierarchy.
# This is usually /usr/X11R6 (or /usr/X11).
XHOME = /usr/X11R6

# XINCDIR is the directory in which the 'X11' directory containing X11 *.h
# files is found.  This is usually /usr/X11R6/include, although there is often
# a link connecting /usr/include/X11 to this directory.
XINCDIR = $(XHOME)/include

# XLIBDIR is the directory in which the X11 libraries are found.
XLIBDIR = $(XHOME)/lib

# WCFLAGS is the set of C compiler options to use when compiling WAVE.
WCFLAGS = $(CFLAGS) -I$(OWINCDIR) -I$(XINCDIR)

# HELPOBJ can be set to "help.o" if you wish to recompile the XView spot help
# functions in "wave/help.c" (recommended under Linux).
# HELPOBJ = help.o
# Otherwise, use the version in libxview by uncommenting the next line:
HELPOBJ =

# WLDFLAGS is the set of loader options appended to the C compiler command line
# to specify loading the WFDB, XView, and Xlib libraries.
WLDFLAGS = $(LDFLAGS) -L$(OWLIBDIR) -L$(XLIBDIR) -lxview -lolgx -lX11
# ...........................................................................

# `make' (with no target specified) will be equivalent to `make all'.
make-all:	all

# `make lib-post-install' should be run after installing the WFDB library.
lib-post-install:
	$(RANLIB) $(DESTDIR)$(LIBDIR)/$(WFDBLIB)

lib-post-uninstall:
	echo "Nothing to be done for lib-post-uninstall"
# _____________________________________________________________________________