# file: Makefile	G. Moody	 20 October 1996
#			Last revised:	 16 October 1999
# UNIX 'make' description file for remote-control applications for WAVE
#
# -----------------------------------------------------------------------------
# waverc: remote-control applications for WAVE
# Copyright (C) 1999 George B. Moody
#
# These programs are free software; you can redistribute them and/or modify
# them under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# These programs are distributed in the hope that they will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License along with
# these programs; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# You may contact the author by e-mail (george@mit.edu) or postal mail
# (MIT Room E25-505A, Cambridge, MA 02139 USA).  For updates to this software,
# please visit PhysioNet (http://www.physionet.org/).
# _____________________________________________________________________________
# file: version.def		G. Moody	24 May 2000
#				Last revised:	19 November 2008
# Each release of the WFDB Software Package is identified by a three-part
# version number, defined below.  Be sure to leave a single space before
# and after the "=" in each of the next three lines!
MAJOR = 10
MINOR = 4
RELEASE = 11
VERSION = $(MAJOR).$(MINOR).$(RELEASE)

# RPMRELEASE can be incremented if changes are made between official
# releases.  It should be reset to 1 whenever the VERSION is changed.
RPMRELEASE = 1

# VDEFS is the set of C compiler options needed to set version number variables
# while compiling the WFDB Software Package.
VDEFS = -DWFDB_MAJOR=$(MAJOR) -DWFDB_MINOR=$(MINOR) -DWFDB_RELEASE=$(RELEASE)

# WAVEVERSION is the WAVE version number.
WAVEVERSION = 6.8
# _____________________________________________________________________________

# Definitions generated by 'configure'

PACKAGE = wfdb-10.4.11
SRCDIR = "/home/george/wfdb-10.4.11"
LONGDATE = 19 November 2008
SHORTDATE = NOVEMBER 2008
ARCH = i686-Linux
# _____________________________________________________________________________

# file: linux.def		G. Moody	31 May 2000
#				Last revised:  4 August 2005
# 'make' definitions for compiling the WFDB Software Package under Linux

# Choose a value for WFDBROOT to determine where the WFDB Software Package will
# be installed.  One of the following is usually a reasonable choice.
# Installing in /usr generally requires root permissions, but will be easiest
# for future software development (no special -I or -L options will be needed
# to compile software with the WFDB library, since the *.h files and the
# library will be installed in the standard directories).
WFDBROOT = /usr
# Installing in /usr/local usually requires root permissions.  On a multi-user
# system where it is desirable to keep the OS vendor's software separate from
# other software, this is a good choice.  Another common choice in such cases
# is /opt .
# WFDBROOT = /usr/local
# To install without root permissions, a good choice is to set WFDBROOT to the
# name of your home directory, as in the example below (change as needed).
# WFDBROOT = /home/frodo

# LC and LL are used to determine C compiler and linker options needed to
# enable NETFILES (code that allows applications linked to the WFDB library to
# read input from HTTP and FTP servers, in addition to the standard filesystem
# support available without NETFILES).  The WFDB library can use either
# libcurl (recommended) or libwww to provide NETFILES support.  To use libcurl,
# set LC to `curl-config --cflags` (note the backquotes) and LN to
# `curl-config --libs`.  Otherwise, to use libwww, set LC to
# `libwww-config --cflags` and LL to `libwww-config --libs`.  If neither
# libcurl nor libwww is available, LC and LL should be empty (and NETFILES
# will be disabled).
LC =
LL =

# BINDIR specifies the directory in which the applications will be installed;
# it should be a directory in the PATH of those who will use the applications.
BINDIR = $(WFDBROOT)/bin

# DBDIR specifies the name of a directory in which to install the contents
# of the `data' directory.
DBDIR = $(WFDBROOT)/database

# INCDIR specifies the name of a directory in which to install the WFDB
# library's #include <...> files.
INCDIR = $(WFDBROOT)/include

# INFODIR is the GNU info directory (optional, needed to `make info').
INFODIR = $(WFDBROOT)/share/info

# LIBDIR specifies the name of a directory in which to install the WFDB
# library.
LIBDIR = $(WFDBROOT)/lib

# MANDIR is the root of the man page directory tree.  On most systems, this is
# something like /usr/man or /usr/local/man (type 'man man' to find out).
MANDIR = $(WFDBROOT)/share/man

# PSPDIR specifies the name of a directory in which to install the PostScript
# prolog (*.pro) files from the 'app' directory.
PSPDIR = $(WFDBROOT)/lib/ps

# CC is the name of your C compiler.
CC = gcc

# CCDEFS is the set of C compiler options needed to set preprocessor variables
# while compiling the WFDB Software Package.  CCDEFS should always include
# VDEFS.
CCDEFS = $(VDEFS)

# MFLAGS is the set of architecture-dependent (-m*) compiler options, which
# is usually empty.  See the gcc manual for information about gcc's -m options.
MFLAGS =

# CFLAGS is the set of C compiler options.  CFLAGS should always include
# CCDEFS.
CFLAGS = $(MFLAGS) -g -O $(CCDEFS) $(LC) -I$(INCDIR)

# LDFLAGS is appended to the C compiler command line to specify loading the
# WFDB library.
LDFLAGS = -L$(LIBDIR) -lwfdb $(LL)

# WFDBLIB is the name of the standard WFDB library.  In order to access it via
# `-lwfdb', WFDBLIB should be `libwfdb.a'.
WFDBLIB = libwfdb.a

# BUILDLIB is the command that creates the static WFDB library once its
# components have been compiled separately;  the list of *.o files that
# make up the library will be appended to BUILDLIB.
BUILDLIB = $(AR) $(ARFLAGS) $(WFDBLIB)

# PRINT is the name of the program used to produce listings (including any
# options for the desired formatting).
PRINT = lpr

# SETPERMISSIONS is the command needed to make the installed files accessible
# to those who will use them.  The value given below makes them readable by
# everyone, and writeable by the owner only.  (If you perform the installation
# as `root', `root' is the owner of the installed files.)
SETPERMISSIONS = chmod 644

# SETDPERMISSIONS is similarly used to make directories created during the
# installation accessible.
SETDPERMISSIONS = chmod 755

# SETLPERMISSIONS is the command needed to make the WFDB library usable by
# programs linked to it.
SETLPERMISSIONS = chmod 644

# SETXPERMISSIONS is the command needed to make the applications accessible.
SETXPERMISSIONS = chmod 755

# STRIP is the command used to compact the compiled binaries by removing their
# symbol tables.
STRIP = strip
# To retain the symbol tables for debugging, comment out the previous line, and
# uncomment the next line.
# STRIP = :

# ...........................................................................
# This section of definitions is used only when compiling WAVE, which is
# possible only if the XView and Xlib libraries and include files have been
# installed.

# OPENWINHOME specifies the root directory of the OpenWindows hierarchy.
# This is usually /usr/openwin.
OPENWINHOME = /usr/openwin

# OWINCDIR is the directory in which the `xview' directory containing XView
# *.h files is found.
OWINCDIR = $(OPENWINHOME)/include

# OWLIBDIR is the directory in which the XView library is found.
OWLIBDIR = $(OPENWINHOME)/lib

# XHOME specifies the root directory of the X11 hierarchy.
# This is usually /usr/X11R6 (or /usr/X11).
XHOME = /usr/X11R6

# XINCDIR is the directory in which the 'X11' directory containing X11 *.h
# files is found.  This is usually /usr/X11R6/include, although there is often
# a link connecting /usr/include/X11 to this directory.
XINCDIR = $(XHOME)/include

# XLIBDIR is the directory in which the X11 libraries are found.
XLIBDIR = $(XHOME)/lib

# WCFLAGS is the set of C compiler options to use when compiling WAVE.
WCFLAGS = $(CFLAGS) -I$(OWINCDIR) -I$(XINCDIR)

# HELPOBJ can be set to "help.o" if you wish to recompile the XView spot help
# functions in "wave/help.c" (recommended under Linux).
HELPOBJ = help.o
# Otherwise, use the version in libxview by uncommenting the next line:
# HELPOBJ =

# WLDFLAGS is the set of loader options appended to the C compiler command line
# to specify loading the WFDB, XView, and Xlib libraries.
WLDFLAGS = $(LDFLAGS) -L$(OWLIBDIR) -L$(XLIBDIR) -lxview -lolgx -lX11
# Users of Red Hat Linux 5.0 or 5.1 (not later versions), use this instead:
# WLDFLAGS = $(LDFLAGS) -L$(XLIBDIR) $(OWLIBDIR)/libxview.a \
#  $(OWLIBDIR)/libolgx.a -lX11
# This setting avoids incompatibilities with the shared (dynamic) libraries.
# ...........................................................................

# `make' (with no target specified) will be equivalent to `make all'.
make-all:	all

# `make lib-post-install' should be run after installing the WFDB library.
lib-post-install:
	ranlib $(LIBDIR)/$(WFDBLIB)

lib-post-uninstall:
	echo "Nothing to be done for lib-post-uninstall"
# _____________________________________________________________________________
# file: Makefile.tpl		G. Moody		24 May 2000
#				Last revised:		11 May 2006
# Change the settings below as appropriate for your setup.

# `make all' creates wavescript and wave-remote without installing them.
all:	wavescript wave-remote

# `make install' installs `url_view', `wavescript', and `wave-remote'.  See
# the WAVE User's Guide for instructions on setting up `wavescript' as a helper
# application for  your Web browser.
install:	$(BINDIR) wave-remote
	rm -f wavescript wavescript.exe
	$(MAKE) wavescript	# make sure wavescript has the correct BINDIR
	$(STRIP) wavescript wave-remote
	$(SETXPERMISSIONS) url_view wavescript wave-remote
	../install.sh $(BINDIR) url_view wavescript wave-remote

# 'make collect': retrieve the installed applications
collect:
	../conf/collect.sh $(BINDIR) url_view wavescript wave-remote

uninstall:
	../uninstall.sh $(BINDIR) url_view wavescript wave-remote

# `wavescript' reads commands from a named file and passes them to WAVE.
wavescript:	wavescript.c
	$(CC) -o wavescript -DBINDIR=$(BINDIR) -O wavescript.c

# `wave-remote' passes its command-line arguments as commands to WAVE.
wave-remote:	wave-remote.c
	$(CC) -o wave-remote -O wave-remote.c

# `wave-remote-test' looks like WAVE to `wavescript' and `wave-remote', and
# can be used to verify their proper operation.  Start `wave-remote-test'
# before starting `wavescript' or `wave-remote';  the commands these programs
# send to WAVE should appear on the standard output of `wave-remote-test.
wave-remote-test:	wave-remote-test.c
	$(CC) -o wave-remote-test -O wave-remote-test.c

# `make clean':  remove intermediate and backup files
clean:
	rm -f wavescript wave-remote wave-remote-test *~

# Create directory for installation if necessary.
$(BINDIR):
	mkdir -p $(BINDIR); $(SETDPERMISSIONS) $(BINDIR)