# file: Makefile G. Moody 7 February 1992 # Last revised: 23 May 2000 # UNIX `make' description file for WFDB calibration and sample data files # # ----------------------------------------------------------------------------- # WFDB data files # Copyright (C) 2000 George B. Moody # # These files are free software; you can redistribute them and/or modify # them under the terms of the GNU General Public License as published by the # Free Software Foundation; either version 2 of the License, or (at your # option) any later version. # # These programs are distributed in the hope that they will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. # # You should have received a copy of the GNU General Public License along with # these programs; if not, see . # # You may contact the author by e-mail (wfdb@physionet.org) or postal mail # (MIT Room E25-505A, Cambridge, MA 02139 USA). For updates to this software, # please visit PhysioNet (http://www.physionet.org/). # _____________________________________________________________________________ # # This file is used with the UNIX `make' command to install the calibration and # sample database files that come with the WFDB software package. Before using # it for the first time, check that the site-specific variables below are # appropriate for your system. To install these files, just type `make' (from # within this directory). To print a set of source listings, type `make # listing'. # _____________________________________________________________________________ # file: version.def G. Moody 24 May 2000 # Last revised: 25 January 2018 # Each release of the WFDB Software Package is identified by a three-part # version number, defined below. Be sure to leave a single space before # and after the "=" in each of the next three lines! MAJOR = 10 MINOR = 7 RELEASE = 0 VERSION = 10.7.0 # RPMRELEASE can be incremented if changes are made between official # releases. It should be reset to 1 whenever the VERSION is changed. RPMRELEASE = 1 # VDEFS is the set of C compiler options needed to set version number variables # while compiling the WFDB Software Package. VDEFS = -DWFDB_MAJOR=$(MAJOR) -DWFDB_MINOR=$(MINOR) -DWFDB_RELEASE=$(RELEASE) # WAVEVERSION is the WAVE version number. WAVEVERSION = 6.12 # _____________________________________________________________________________ # Definitions generated by 'configure' PACKAGE = wfdb-10.7.0 SRCDIR = "/tmp/wfdb-10.7.0" LONGDATE = 10 June 2022 SHORTDATE = JUNE 2022 YEAR = 2022 ARCH = x86_64-Linux BUILD_CC = $(CC) # _____________________________________________________________________________ # file: linux.def G. Moody 31 May 2000 # Last revised: 18 May 2022 # 'make' definitions for compiling the WFDB Software Package under Linux # Choose a value for WFDBROOT to determine where the WFDB Software Package will # be installed. One of the following is usually a reasonable choice. # Installing in /usr generally requires root permissions, but will be easiest # for future software development (no special -I or -L options will be needed # to compile software with the WFDB library, since the *.h files and the # library will be installed in the standard directories). WFDBROOT = /usr/local # Installing in /usr/local usually requires root permissions. On a multi-user # system where it is desirable to keep the OS vendor's software separate from # other software, this is a good choice. Another common choice in such cases # is /opt . # WFDBROOT = /usr/local # To install without root permissions, a good choice is to set WFDBROOT to the # name of your home directory, as in the example below (change as needed). # WFDBROOT = /home/frodo # LC and LL are used to determine C compiler and linker options needed to # enable NETFILES (code that allows applications linked to the WFDB library to # read input from HTTP and FTP servers, in addition to the standard filesystem # support available without NETFILES). The WFDB library can use either # libcurl (recommended) or libwww to provide NETFILES support. To use libcurl, # set LC to `curl-config --cflags` (note the backquotes) and LL to # `curl-config --libs`. Otherwise, to use libwww, set LC to # `libwww-config --cflags` and LL to `libwww-config --libs`. If neither # libcurl nor libwww is available, LC and LL should be empty (and NETFILES # will be disabled). LC = `curl-config --cflags` LL = `curl-config --libs` # LIBFLAC_CFLAGS and LIBFLAC_LIBS specify the set of C compiler and # linker options needed to link with the FLAC library. LIBFLAC_CFLAGS = `pkg-config --cflags flac` LIBFLAC_LIBS = `pkg-config --libs flac` # BINDIR specifies the directory in which the applications will be installed; # it should be a directory in the PATH of those who will use the applications. BINDIR = $(WFDBROOT)/bin # DBDIR specifies the name of a directory in which to install the contents # of the `data' directory. DBDIR = $(WFDBROOT)/database # INCDIR specifies the name of a directory in which to install the WFDB # library's #include <...> files. INCDIR = $(WFDBROOT)/include # INFODIR is the GNU info directory (optional, needed to `make info'). INFODIR = $(WFDBROOT)/share/info # LIBDIR specifies the name of a directory in which to install the WFDB # library. LIBDIR = $(WFDBROOT)/lib # MANDIR is the root of the man page directory tree. On most systems, this is # something like /usr/man or /usr/local/man (type 'man man' to find out). MANDIR = $(WFDBROOT)/share/man # PSPDIR specifies the name of a directory in which to install the PostScript # prolog (*.pro) files from the 'app' directory. PSPDIR = $(WFDBROOT)/lib/ps # CC is the name of your C compiler. CC = gcc # CCDEFS is the set of C compiler options needed to set preprocessor variables # while compiling the WFDB Software Package. CCDEFS should always include # VDEFS (the version definitions). Under Linux, add -fno-stack-protector # when compiling the original (SWIG-based) WFDB Toolkit for Matlab. CCDEFS = -DWFDB_FLAC_SUPPORT $(VDEFS) -DWFDB_LARGETIME # MFLAGS is the set of architecture-dependent (-m*) compiler options, which # is usually empty. See the gcc manual for information about gcc's -m options. MFLAGS = # CFLAGS is the set of C compiler options. CFLAGS should always include # CCDEFS. CFLAGS = -Wno-implicit -Wformat $(MFLAGS) -g -O $(CCDEFS) $(LC) $(LIBFLAC_CFLAGS) \ -I$(DESTDIR)$(INCDIR) # RPATHFLAGS is a set of C compiler options that cause the program to # search for shared libraries in a non-standard location at run-time. # These options are not needed or useful when using a static library. RPATHFLAGS = -Wl,--enable-new-dtags,-rpath,$(LIBDIR) # LDFLAGS is appended to the C compiler command line to specify loading the # WFDB library. LDFLAGS = -L$(DESTDIR)$(LIBDIR) -lwfdb $(RPATHFLAGS) # WFDBLIB is the name of the standard WFDB library. In order to access it via # `-lwfdb', WFDBLIB should be `libwfdb.a'. WFDBLIB = libwfdb.a # BUILDLIB is the command that creates the static WFDB library once its # components have been compiled separately; the list of *.o files that # make up the library will be appended to BUILDLIB. BUILDLIB = $(AR) $(ARFLAGS) $(WFDBLIB) # RANLIB is the command that builds an index of symbols in the static # library, after it has been created by the BUILDLIB command. RANLIB = ranlib # PRINT is the name of the program used to produce listings (including any # options for the desired formatting). PRINT = lpr # SETPERMISSIONS is the command needed to make the installed files accessible # to those who will use them. The value given below makes them readable by # everyone, and writeable by the owner only. (If you perform the installation # as `root', `root' is the owner of the installed files.) SETPERMISSIONS = chmod 644 # SETDPERMISSIONS is similarly used to make directories created during the # installation accessible. SETDPERMISSIONS = chmod 755 # SETLPERMISSIONS is the command needed to make the WFDB library usable by # programs linked to it. SETLPERMISSIONS = chmod 644 # SETXPERMISSIONS is the command needed to make the applications accessible. SETXPERMISSIONS = chmod 755 # STRIP is the command used to compact the compiled binaries by removing their # symbol tables. STRIP = strip # To retain the symbol tables for debugging, comment out the previous line, and # uncomment the next line. # STRIP = : # ........................................................................... # This section of definitions is used only when compiling WAVE, which is # possible only if the XView and Xlib libraries and include files have been # installed. # OPENWINHOME specifies the root directory of the OpenWindows hierarchy. # This is usually /usr/openwin. OPENWINHOME = /usr/openwin # OWINCDIR is the directory in which the `xview' directory containing XView # *.h files is found. OWINCDIR = $(OPENWINHOME)/include # OWLIBDIR is the directory in which the XView library is found. OWLIBDIR = $(OPENWINHOME)/lib # XHOME specifies the root directory of the X11 hierarchy. # This is usually /usr/X11R6 (or /usr/X11). XHOME = /usr/X11R6 # XINCDIR is the directory in which the 'X11' directory containing X11 *.h # files is found. This is usually /usr/X11R6/include, although there is often # a link connecting /usr/include/X11 to this directory. XINCDIR = $(XHOME)/include # XLIBDIR is the directory in which the X11 libraries are found. XLIBDIR = $(XHOME)/lib # RPCINCDIR is the directory in which the 'rpc/rpc.h' file is found, # if it is not in the default path. RPCINCDIR = /usr/include/tirpc # WCFLAGS is the set of C compiler options to use when compiling WAVE. WCFLAGS = $(CFLAGS) -I$(OWINCDIR) -I$(XINCDIR) -I$(RPCINCDIR) \ -fno-stack-protector # HELPOBJ can be set to "help.o" if you wish to recompile the XView spot help # functions in "wave/help.c" (recommended under Linux). HELPOBJ = help.o # Otherwise, use the version in libxview by uncommenting the next line: # HELPOBJ = # WLDFLAGS is the set of loader options appended to the C compiler command line # to specify loading the WFDB, XView, and Xlib libraries. WLDFLAGS = $(LDFLAGS) -L$(OWLIBDIR) -L$(XLIBDIR) -lxview -lolgx -lX11 # Users of Red Hat Linux 5.0 or 5.1 (not later versions), use this instead: # WLDFLAGS = $(LDFLAGS) -L$(XLIBDIR) $(OWLIBDIR)/libxview.a \ # $(OWLIBDIR)/libolgx.a -lX11 # This setting avoids incompatibilities with the shared (dynamic) libraries. # ........................................................................... # `make' (with no target specified) will be equivalent to `make all'. make-all: all # `make lib-post-install' should be run after installing the WFDB library. lib-post-install: $(RANLIB) $(DESTDIR)$(LIBDIR)/$(WFDBLIB) lib-post-uninstall: echo "Nothing to be done for lib-post-uninstall" # _____________________________________________________________________________ # file: Makefile.tpl G. Moody 23 May 2000 # Last revised: 8 March 2017 # This section of the Makefile should not need to be changed. DBFILES = 100a.atr 100s.atr 100s.dat *.hea *list wfdbcal all: @echo Nothing to be made in `pwd`. install: $(DESTDIR)$(DBDIR) $(DESTDIR)$(DBDIR)/pipe $(DESTDIR)$(DBDIR)/tape cp $(DBFILES) $(DESTDIR)$(DBDIR) cp pipe/* $(DESTDIR)$(DBDIR)/pipe cp tape/* $(DESTDIR)$(DBDIR)/tape -cd $(DESTDIR)$(DBDIR); $(SETPERMISSIONS) $(DBFILES) -cd $(DESTDIR)$(DBDIR); ln -sf wfdbcal dbcal -cd $(DESTDIR)$(DBDIR)/pipe; $(SETPERMISSIONS) * -cd $(DESTDIR)$(DBDIR)/tape; $(SETPERMISSIONS) * # 'make collect': retrieve the installed files collect: ../conf/collect.sh $(DBDIR) $(DBFILES) wfdbcal dbcal cd pipe; ../../conf/collect.sh $(DBDIR)/pipe * cd tape; ../../conf/collect.sh $(DBDIR)/tape * uninstall: cd pipe; ../../uninstall.sh $(DESTDIR)$(DBDIR)/pipe * cd tape; ../../uninstall.sh $(DESTDIR)$(DBDIR)/tape * ../uninstall.sh $(DESTDIR)$(DBDIR) $(DBFILES) dbcal $(DESTDIR)$(DBDIR): mkdir -p $(DESTDIR)$(DBDIR) $(SETDPERMISSIONS) $(DESTDIR)$(DBDIR) $(DESTDIR)$(DBDIR)/pipe: $(DESTDIR)$(DBDIR) mkdir -p $(DESTDIR)$(DBDIR)/pipe $(SETDPERMISSIONS) $(DESTDIR)$(DBDIR)/pipe $(DESTDIR)$(DBDIR)/tape: $(DESTDIR)$(DBDIR) mkdir -p $(DESTDIR)$(DBDIR)/tape $(SETDPERMISSIONS) $(DESTDIR)$(DBDIR)/tape listing: $(PRINT) README Makefile makefile.dos clean: rm -f *~